The Flaring SPIN Tool is designed for the most common tubing diameters in HVAC. The high-temperature method preserves the copper’s/aluminum’s malleability while performing the flare, preventing cracks and leaks. The Flaring SPIN tools were developed and are recommended for soft copper.
The SPIN Flaring Tools make flares with the ideal dimensions for a perfect packing, due a wider area of contact between the flare surface and the valve/tube accessory.
To top that, you can make flares with the SPIN Flaring Tools in just 5 seconds!
To perform the flaring in copper/aluminum tubing, simply attach the corresponding SPIN Tool size to a drill*. Because they perform their job using high-temperature and friction, no clamping tools or holders are necessary. Flares made with the SPIN Tools are compatible with high-pressure refrigerants such as R410a.
All SPIN Tools are designed to work with drills and/or screwdrivers, with a minimum of 1,800 RPM and 500 watts, for corded drills, or superior and 1,800RPM and 18V, or superior, for cordless drills. Using the SPIN Tools with a less powerful equipment tool than suggested, may result decreased and low-quality performances.
- Flawless flares in five seconds
- Universal drill compatibility
- Reusable tool with long-life design
- Innovative new technology
- Heat by friction
- Works with soft copper creating fewer cracks
- To use with hard cooper just preheat the cooper.
1/4″ – F1014
5/16″ – F1516
3/8″ – F1038
1/2″ – F1012
5/8″ – F1058
3/4″ – F1034
7/8″ – F1078
6mm – F1806
8mm – F1808
10mm – F1810
12mm – F1812
14mm – F1814
15mm – F1815
16mm – F1816
18mm – F1818
19mm – F1819
22mm – F1922